What kind of fish finder do i need

If you are looking for a fish finder that is easy to use and does not have to spend much time on installation, this fish finder may be the best choice. You can easily install this fish finder. Boat mountable fish finders usually take a long time to install and also require some extra accessories. It is designed so that you can mount it on a trolling boat and use it comfortably. The best feature you will find in this fish finder is its coverage area. It works with a double coverage area from an ordinary fish finder, which is why you will get an excellent fishing experience.

Its function settings are easy to operate. So this fish finder for trolling motor is suitable for all ages use. I hope you will enjoy fishing with it. Here comes another product of Garmin Company. You can also count this fish finder as your best value product. Because inside this product you will find all the features that have to be in a good fish finder.

And to see these details, you will get a 5-inch display with a resolution of x pixels. This display will help you to see the full details. Built-in GPS has been used to ensure that you do not have to face any fishing problems in any situation. This will help waypoint marking and route creation. And besides, it will also show you the speed of your boat. This fish finder for trolling motor is designed to be used in all positions. No matter where you use salt water and fresh water, it will give you satisfactory results.

This is the best fish finder for trolling motor. With this outstanding design and all features, it is capable of surpassing any ordinary fish finder. So if you want a good quality fish finder that is handy and full of features, you can give it preference.

Each fish finder is made with certain aspects in mind. For this reason, it has some particular aspects which are called features. Easily locate, stay on and catch more fish with a full array of angling and positioning tools.

Connect your Humminbird fish finder with an i-Pilot Link-equipped Minn Kota trolling motor for precise boat control. No matter where the journey takes you, only Humminbird gives you one-of-a-kind features, such as downloadable Lakemaster maps and the ability to create your own charts automatically.

Shop Shop. Fish Finder Selector. Joined Jan 14, Messages What size wire comes out of the unit? Use the same or better.

Joined May 7, Messages The average power usage on these devices is low. But their impluse usage a lot higher due to intermitten transducer pings which occur at high power. In addition, they are liable to generate fair amount of noise on their ground plane. Both of these call for thicker wires than one would normally think is needed.

I would use 14 or 16 guage wire If so, then you want to have a single ground for both. Otherwise you get a ground loop by going to the battery for one, and to the junction box for the other. No GPS, just the transducer mounted on the trolling motor.

I'm wiring directly to the battery from the depth finder. Silvertip Supreme Mariner. Joined Sep 22, Messages 28, Use 16 gauge wire. Anything less is certainly capable of handling the small current but will not stand up to the physical abuse on a boat. After that, they get picked up by the transducer. When the data comes back, it goes into the central unit.

That is where these signals get processed into a picture on the display which you can see and understand. Transducers come with different types of mounts. The easiest one to install is the transom mount. But, if you have a bigger boat or need something more serious, you can opt for another type, like the thru-hull mount.

Depending on which type of boat you'll be using, you need to pick the right transducer material. For enthusiast and casual fishermen, a plastic transom mount will do just fine.

They are compatible with almost all kinds of boats. If you're using a transducer with a thru-hull or an in-hull mount, fiberglass or metal hulls need plastic housings. Aluminum or steel hulls need stainless steel housings. Bronze housings are for boats with fiberglass of wood hulls. When it comes to recreational users, most fish finders come equipped with trolling motor transducers or transducers with transom mounts.

These work with any almost any kind of boat, you just need to make sure you follow installation guidelines. If you like the idea of a thru-hull transducer, the choice is between plastic and bronze. When choosing a transducer, an important aspect to consider is the cone angle. In other words, the cone angle tells you the width of the beam emitted into the water from your boat. A wider cone means that a larger area will get covered. As the beam goes down, the cone angle expands, but at the expense of sensitivity in deeper water.

Transducers come with cones that range from 9 degrees to more than 60 degrees. Most devices you will come across tend to be between 16 and 20 degrees. If you're just starting and want to fish in different water depths, a degree cone is an excellent choice.

An interesting feature when it comes to transducers is that they can emit more than one cone from one point. There's one beam with a conventional transducer, but with more advanced units you can get multiple. Some have a dual beam, some a triple, some even a side beam and so on.