Auto gordian knot how long

The default is for 2 CDs. If you make a 2 or 3 CD rip, then it will also be split into MB pieces for you. There are other Output Size options besides the Predefined Size options.

Maybe you have CDs of a different size than the standard MB ones. Maybe you're going to keep the movie on the hard drive or put it on a DVD-R. In such cases you might want to choose a Custom Size. A Custom Size won't be split. If you want a Custom Size for those sizes, then make them for a slightly different size, such as or MB.

A Quality encode will give you even quality throughout the movie at your designated percentage. That's up to you, though. But remember, if you use a Percentage output, you'll lose control over file size. A Quality Percentage rip won't be split. Note: "Target Quality" mode performs 1-pass encoding while "Target Size" performs 2-passes encoding. There have been quite a few questions and problems concerning Quality Mode, so let me try and cover some of them.

It's true that you'll lose complete control of file size. The final size can sometimes even become larger than the original vob files the original DVD. This can occur when the material is hard to compress.

Concert DVDs are often like that, and can often result in huge file sizes. Cheaply made films using low-grade film stock are hard to compress. Advanced Settings. If this is one of your first tries at this, then you will get an excellent quality backup using the defaults.

Once you're feeling a bit more confident, you might want to venture into the Advanced Settings. Minimum width means that the movie will not be encoded at a horizontal width lower than what you set. It will try the higher resolutions, but if the compression test results are too low, it will try lower resolutions until it gets to your minimum width, stop there, and encode it at that width and corresponding height , no matter what the compress test results might suggest.

Although AutoGK can make certain adjustments if the quality won't be good for your chosen horizontal resolution and file size, it's very possible that the quality will suffer if you choose a high resolution fixed width and go for 1 CD. The chances of this happening are less if you choose a Minimum width, but it can still happen.

If you choose maximum width then AutoGK will try lower resolutions and stop when you desired maximum is reached even if compressibility would allow it to go higher. This might result in undersized final files, so you have to be careful. With time you'll learn the relative compressibility of different movies, but if you change from the default Auto width, you might pay attention to the Compression Test results when they show up in the Log Window.

In that case you may wish to abort the process and start over with a different Horizontal width, use original audio or use an extra CD. Here's the Advanced Options screen.

Auto Width is usually the best choice. All of the default choices can be overridden, but make sure you know what you're doing if you do override them. It is, for example, almost impossible to get good video quality for a one CD rip, if you've chosen AC3 Audio, because the AC3 takes up so much room. And if your movie is long, and difficult to compress, even when doing a 2 CD rip, you may want to choose MP3 Audio, rather than the default AC3.

Next is the Codec choice. You have 2 choices, with XviD being the default. There's a link to Doom9's Codec Shootout comparison at the bottom of the page, which may or may not help you to decide which to use.

XviD 1. You'll have to get DivX 5. If you're still not sure which to use, if it's any help to you, both writers of this guide prefer XviD. Both codecs will give good quality results. If you are wondering what is "Output format" setting and why it is disabled - do not worry at the moment.

It was designed for future usage of DivX Media Format that is not available yet. You may be unpleasantly surprised , if you next wanted to make a high resolution. This will take a few minutes to set up maybe, for a full movie, and a few minutes longer if you want subtitles.

It will then play the movie. This isn't really a necessary step, unless you just want to see what it does, or check to see if the Subtitles are displaying correctly. If you are testing out different Sub choices, the indexing of a movie via DGIndex happens only once, and after that it's quicker and easier to switch Subs although VobSub will still be run for every new subtitle choice.

When checking out the subtitles, don't be alarmed to see them being displayed twice as "double subs". One is the subs as they'll be burned into the movie, and the other is the subs being displayed externally by Direct VobSub.

After the encoding is complete, they'll be fine. The Preview will play the cropped and resized movie in WMP 6. It should look fairly similar to the way your completed. If you keep the default Auto Width, the Horizontal Resolution may or may not be different from what the Preview displays. You can scroll around and have a look, and even play it Full Screen.

If you have elected to include subtitles, it will also display them, but it won't play any audio. It is recommended that if you are going to have subtitles in your movie, that you test them with the Preview before encoding. If you choose to display different Subtitle Streams with the Preview, the movie won't be re-indexed again, which will save some time. If you get the wrong Subs, or particularly if you're hunting for Forced Subs, go back and try another one, and so on, until you find what you're looking for.

When choosing the default burned in subs, and then testing them in the Preview, you'll see "double subs". You can ignore that, and be sure that the subs will be embedded in the movie correctly. After you've added your movie s to the Job queue, just hit the Start button and wait.

With slower computers it's a long process, and you may want to set it up to work overnight or while you're at work or in class. Again, if you want the computer to shut down automatically when done, check the box.

Hitting the Abort Button will cause the program to ask if you really want to halt the process, and then aborts the rest of the job. But if you do so, you'll have to start all over again later except for the decrypting step. While the encoding is going on you might want to do some other work on the computer, and you'll probably find that your computer has slowed to a crawl.

There you can change processing thread priority. Note if you have a look at VDubMod process in the task manager you will always see it set on "Idle" priority. This might slow encoding down on some configurations unless you set processing thread priority to something really high in VDubMod. Keep in mind that VDubMod thread priority setting can be set in its preferences and will affect all consequent runs.

Some of the options only work with XviD 1. Most of the options are per-input settings, i. However there are a few that are global, so that they affect all encodings done by AutoGK.

Note that you have to put you input files into separate directories if they require different hidden options as AutoGK can only set hidden options for a particular directory, not file. The original audio for old films was mono, but often DVDs of old films will come with a dual mono AC3, and when converted to MP3, it'll retain the two channels. By converting the audio to one channel mono you can free up lots of space sometimes 50 MB or more to help improve the quality of the video.

Even if the AC3 is single channel, if you convert it to MP3, the default will be two channels of audio, and, again, you'll want to choose the Mono MP3 option. If you do go for Mono audio NOT recommended when the movie was originally 2 or more channels , then AutoGK takes the bitrate from Advanced Settings and divides it by 2 to produce output mono bitrate.

The result is a more stable, a little less detailed image. Exactly what you need for cartoons like Futurama or the Simpsons. I don't think that I'd recommend it for the more detailed Japanese anime. Beginners can ignore it. Sometimes rarely AutoGK's Analysis step flubs on diagnosing the video content and resulting AVI may be jerky or shutters a lot , and you might get better results overriding the decision that it's a hybrid, and go for a normal IVTC instead.

Same goes for " Force Deinterlace " option which can be a second choice when dealing with hybrid material. If you can cut the size of the end credits, you can use those freed-up bits to improve the quality of the movie itself. So, you check the box and fill in the time the credits start inside the Frame Calc. This is most useful when you have fixed or scrolling white on black end credits in which case you also check the Greyscale mode box.

One way to find the frame number at which they start is to run the Preview. Then after AutoGK has created a. If the credits are the kind with video like the bloopers at the end of Jackie Chan's movies , or even the kind with some pictures as the credits roll, then you may not wish to use End Credits Compression at all. But with movies with long credits, it's not uncommon to save 40 or 50 MB by using the compression feature. That will allow considerable improvement including a higher resolution to the movie.

One way to get that time is to play the DVD in your computer, and skip to the chapter where the end credits start. In this case " Tune auto crop parameters " is very handy. Threshold defines how sensitive auto crop will be: the higher the value the more cropping will be done.

To completely disable audio crop you can set threshold to 0. By selecting a different starting frames you force auto crop not to examine irrelevant starting movie sequence.

If you disable autocrop with threshold 0 then "force cropping" option becomes fully manual crop. Remember always to check how movie looks like after you set new auto crop parameters using Preview function of AutoGK. If source is misdetected as or then you have a choice of manually setting correct AR. Both servers are fast and reliable servers, located in …. This program puts the VOB files onto your hard drive, and in the process breaks the encryption and Macrovision protection which DVDs have, and which is illegal in many countries.

You'll ha. Auto Gordian Knot: current version 2. Some posts are auto-moderated to reduce spam, including links and swear words. Auto Gordian Knot 0. Total Number of links listed: Status : Online. Replies: 1 Last Post: 9th Aug , Contact Us VideoHelp Top. All times are GMT The time now is All rights reserved. Latest tool updates. SichboPVR 4. VideoPad Video Editor ProgTV 2. Monkey's Audio 7. Turbo Play 2. PlayClaw 6 Build Plex Media Server 1. Recent DVD Hacks.

Panasonic DVD-S Philips BDP Samsung BD-H LG BP Pioneer DV Samsung BD-JR.